All Categories > Anchors > Threaded Rod Anchors > Sammys® Threaded Rod Anchors 3/8" > Sammys® 3/8" Vertical Threaded Rod Anchor > Part Number 8153922  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Part Number 8153922, Sammys® 3/8" Vertical Threaded Rod Anchor - XP 35


  • Two step installation process
    • No custom bracket assembly required
    • Reduces installation time and cost
  • Threaded rod attachment
    • Allows specifiers and designers to engineer systems with fewer attachment points
    • Holds from 1146-1783 lbs.
  • Installs with SAMMY X-PRESS IT installation tool
    • Ensures correct installation torque
    • Reduces occurrences of fastener failure due to over driving




 SPECIFICATIONS   APPLICATIONS   PRODUCT FEATURES   INSTALLATION INSTRUCTIONS   VIDEO   

Installation Notes
1. Insert the bit receiver with 25/64” drill bit into the chuck of a minimum 18-volt battery operated drill and drill the 25/64” hole through the metal deck at the desired location.

2. Slide the sleeve of the A88X-Press It® over the drill bit until it connects to the receiver.

3. With the internally-threaded portion of the anchor (XP 20, XP 35) positioned inside the socket of the installation tool, secure the square base of the Sammy X-Press® within the square recessed guidelines of the installation tool.

4. Insert the Sammy X-Press® anchor through the pre-drilled hole. Install the Sammy X-Press® anchor to release the expandable portion of the anchor and secure the anchor in the metal deck or purlin to allow vertical orientation of threaded rod.

Important Note: Warranty requires the use of the appropriate Sammy X-Press It® Tool for installations.

STRUCTURAL CONCRETE OVER METAL DECK (Follow steps 1-4 before pouring concrete)

NON-STRUCTURAL LIGHTWEIGHT CONCRETE APPLIED OVER METAL DECK NOT FOR USE WITH AIR DRY DENSITY GREATER THAN 35 PCF (Follow steps 1-4 before the LWC has been applied).


 DOWNLOADS 

2018-19 Brochure for Sammys® 1/4 to 3/8" Vertical and 3/8" Horizontal Threaded Rod Anchor
(PDF, 226KB)

2018-19 Sammys® Catalog
(PDF, 1962KB)

SXP 35 - Sammys X-Press Swivel for Purlin DWG

SXP 35 - Sammys X-Press Swivel for Purlin DXF

SXP 35 - Sammys X-Press Swivel for Purlin IGS

Sammys Master Application Drawings DWG

Sammys Master Application Drawings DXF

Sammys Master Application Drawings IGS