All Categories > Anchors > Threaded Rod Anchors > Sammys® Threaded Rod Anchors 3/8" > Sammys® 3/8" Horizontal Threaded Rod Anchor > Part Number 8056957  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Part Number 8056957, Sammys® 3/8" Horizontal Threaded Rod Anchor - SWDR 516


  • One step installation process
    • No predrilling required
    • Reduces installation time and cost
  • 97 degree attachment angle
    • Attaches to the side of wood elements
    • Provides more attachment locations for designers and specifiers
  • Installs with SAMMYS Nut Driver
    • Ensures correct installation torque
    • Reduces occurrences of fastener failure due to over driving




 SPECIFICATIONS   APPLICATIONS   INSTALLATION INSTRUCTIONS   VIDEO   SEISMIC CALCULATOR   PRODUCT FEATURES   NOTE   

Installation Notes
1. Insert the appropriate nut driver into a 3/8" or 1/2" portable drill.

2. Insert the Sammys® into the #14SW (red) nut driver (p/n 8114910). With drill unit in a horizontal position and at a right angle to the structural member, begin installation.

3. When the nut driver spins freely on the Sammys®, stop the drill and remove.

4. The unit is now ready to receive 1/4", 3/8", M10, M8 or metric all thread rod or bolt stock.

Note: When installing SWDR, follow the above instructions, then add retainer nut and torque to 20 foot lbs. for maximum pullout in purlin steel.


 DOWNLOADS 

2018-19 Brochure for Sammys® 3/8" Horizontal and Swivel Threaded Rod Anchor
(PDF, 251KB)

2018-19 Sammys® Catalog
(PDF, 1962KB)

SWDR - Horizontal Steel Sammys Sidewinders w/ Nut DWG

SWDR - Horizontal Steel Sammys Sidewinders w/ Nut DXF

SWDR - Horizontal Steel Sammys Sidewinders w/ Nut IGS

Sammys Master Application Drawings DWG

Sammys Master Application Drawings DXF

Sammys Master Application Drawings IGS