Part Number 8056957, Sammys® 3/8" Horizontal Threaded Rod Anchor - SWDR 516
One step installation process
No predrilling required
Reduces installation time and cost
97 degree attachment angle
Attaches to the side of wood elements
Provides more attachment locations for designers and specifiers
Installs with SAMMYS Nut Driver
Ensures correct installation torque
Reduces occurrences of fastener failure due to over driving
INSTALLATION INSTRUCTIONS
Installation Notes
1. Insert the appropriate nut driver into a 3/8" or 1/2" portable drill.
2. Insert the Sammys® into the #14SW (red) nut driver (p/n 8114910). With drill unit in a horizontal position and at a right angle to the structural member, begin installation.
3. When the nut driver spins freely on the Sammys®, stop the drill and remove.
4. The unit is now ready to receive 1/4", 3/8", M10, M8 or metric all thread rod or bolt stock.
Note: When installing SWDR, follow the above instructions, then add retainer nut and torque to 20 foot lbs. for maximum pullout in purlin steel.
