|
|
|
|
Part Number 1002000, Teks® with Bonded Washer Steel-to-Steel Self-Drilling Screws - TEKS® 5 HWH/BD CL 12-24 X 2"
|
|
|
|
|
|
- Teks Drill Point
- Non-walking, cutting edges, pigtail reduction
- Engages material faster, drills with less effort, safer installation
- EPDM washer with vulcanized bonding
- Provides water tight seal and eliminates separation from the metal backing
- Prevents leaks
- Climaseal®
- Coating provides long life protection
- Fewer replacements
- Integrated Drill Point & Tapping Threads
- Quick transition from drilling to tapping
- Lower installation torque
|
|
|
|
A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2500. A maximum 1800 RPM is recommended for Teks fasteners.
New magnetic sockets must be correctly set before use. Remove chip build-up as needed.
Adjust the screwgun nosepiece to properly seat the fastener.
Overdriving may result in torsional failure of the fastener or stripout of the substrate.
The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.
|
|
|
|
|
|
|
|
|
|
|
|
