All Categories > Screws > Self-Drilling Screws > Metal-to-Metal Self-Drilling Screws > Steel-to-Steel Self-Drilling Screws > Teks® Steel-to-Steel Self-Drilling Screws > Teks® 4.5 Steel-to-Steel Self-Drilling Screws > Part Number 1414000  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Part Number 1414000, Teks® Steel to Steel Self-Drilling Screws - TEKS® 4.5 HWH CL 12-24 X 1-1/4"


  • Teks Drill Point
    • Non-walking, cutting edges, pigtail reduction
    • Engages material faster, drills with less effort, safer installation
  • Heavy Duty load bearing area
    • Attaches up to 7.2" of material including 1/2" steel
    • Attaches up to 7.2" of material including 1/2" steel
  • Climaseal®
    • Coating provides long life protection
    • Fewer replacements
  • Integrated Drill Point & Tapping Threads
    • Quick transition from drilling to tapping
    • Lower installation torque




 SPECIFICATIONS   APPLICATION   PRODUCT FEATURES   INSTALLATION GUIDELINES   

A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have an RPM range of 0-2500. (Maximum 1800 RPM is recommended for Teks 5 fasteners).

Adjust the screwgun nosepiece to properly seat the fastener.

New magnetic sockets must be correctly set before use. Remove chip build-up as needed.

The fastener is fully seated when the head is flush with the work surface.

Overdriving may result in torsional failure of the fastener or stripout of the substrate.

The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread.


 DOWNLOADS 

2019 Buildex Brochure for Teks® 4/4.5/5 Steel-to-Steel Self-Drilling Screws
(PDF, 135KB)

Teks 4, 4.5, & 5 DWG

Teks 4, 4.5, & 5 DXF

Teks 4, 4.5, & 5 IGS